
Custom Design:
All Guorun safety gratings are also available as flat blanks without folded edges.
In that case, the maximum embossed field width must not be greater than 750 mm for diamond forms.
For manufacturing reasons, these flat cuts have a slightly curved finish.
Gratings with other dimensions (H/W/L) than those mentioned above can also be produced.
Gratings with unperforated edges or surfaces on one or both front surfaces are also available.
We can also be supplied with ø 5-mm drain holes.
Please contact us for further technical questions.
Materials of grip strut plank grating, stairs trends grating
grip strut plank grating, stairs trends grating Specification
1 Diamond / 2-1/2" Width | ||||
---|---|---|---|---|
Diamond Pattern | Material | Width | Channel Depth | Span |
1 Diamond | 14 gauge steel | 2-1/2" | 1-1/8" | 16", 18", 20", 24", 30", 36" |
2 Diamond / 4-3/4" Width | |||||
---|---|---|---|---|---|
Diamond Pattern | Width | Channel Depth | Pre-galvanized | Aluminum | Stainless |
2 Diamonds | 4-3/4" | 1-1/2" | 14 Ga., 12 Ga. | 12 Ga. (.080"), 10 Ga.(.100") | N/A |
4-3/4" | 2" | 14 Ga., 12 Ga. | 12 Ga. (.080"), 10 Ga.(.100") | 16 Ga. (.062") | |
4-3/4" | 2-1/2" | 14 Ga., 12 Ga. | 12 Ga. (.080"), 10 Ga.(.100") | N/A |
3 Diamond / 7" Width | |||||
---|---|---|---|---|---|
Diamond Pattern | Width | Channel Depth | Pre-galvanized | Aluminum | Stainless |
3 Diamonds | 7" | 1-1/2" | 14 Ga., 12 Ga. | 12 Ga. (.080"), 10 Ga.(.100") | N/A |
7" | 2" | 14 Ga., 12 Ga. | 12 Ga. (.080"), 10 Ga.(.100") | 16 Ga. (.062") | |
7" | 2-1/2" | 14 Ga., 12 Ga. | 12 Ga. (.080"), 10 Ga.(.100") | N/A | |
7" | 3" | 12 Ga. | 12 Ga. (.080"), 10 Ga.(.100") | N/A |
4 Diamond / 9-1/2" Width | |||||
---|---|---|---|---|---|
Diamond Pattern | Width | Channel Depth | Pre-galvanized | Aluminum | Stainless |
4 Diamonds | 9-1/2" | 1-1/2" | 14 Ga., 12 Ga. | 12 Ga. (.080"), 10 Ga.(.100") | N/A |
9-1/2" | 2" | 14 Ga., 12 Ga. | 12 Ga. (.080"), 10 Ga.(.100") | 16 Ga. 304 & 316L | |
9-1/2" | 2-1/2" | N/A | 12 Ga. (.080"), 10 Ga.(.100") | N/A | |
9-1/2" | 3" | 12 Ga. | 12 Ga. (.080"), 10 Ga.(.100") | N/A |
5 Diamond / 11-3/4" Width | |||||
---|---|---|---|---|---|
Diamond Pattern | Width | Channel Depth | Pre-galvanized | Aluminum | Stainless |
5 Diamonds | 11-3/4" | 1-1/2" | 14 Ga, 12 Ga. | 12 Ga. (.080"), 10 Ga.(.100") | N/A |
11-3/4" | 2" | 14 Ga., 12 Ga. | 12 Ga. (.080"), 10 Ga.(.100") | 16 Ga. 304 & 316L | |
11-3/4" | 2-1/2" | 14 Ga., 12 Ga. | 12 Ga. (.080"), 10 Ga.(.100") | N/A | |
11-3/4" | 3" | 12 Ga. | 12 Ga. (.080"), 10 Ga.(.100") | N/A |
8 Diamond / 18-3/4" Width | |||||
---|---|---|---|---|---|
Diamond Pattern | Width | Channel Depth | Pre-galvanized | Aluminum | Stainless |
8 Diamonds | 18-3/4" | 1-1/2" | 14 Ga., 12 Ga. | 10 Ga. (.100") | N/A |
18-3/4" | 2" | 14 Ga., 12 Ga. | 10 Ga. (.100") | N/A | |
18-3/4" | 2-1/2" | 14 Ga., 12 Ga. | 10 Ga. (.100") | N/A | |
18-3/4" | 3" | 14 Ga., 12 Ga. | 10 Ga. (.100") | N/A |
10 Diamond / 24" Width | |||||
---|---|---|---|---|---|
Diamond Pattern | Width | Channel Depth | Pre-galvanized | Aluminum | Stainless |
10 Diamonds | 24" | 2" | 14 Ga., 12 Ga. | N/A | N/A |
24" | 3" | 14 Ga., 12 Ga. | N/A | N/A |
Diamond Safety Grating Plank,Diamond Safety Grating Walkway,Diamond Safety Grating Stair Treads,Anti-skid Stair Treads,
Traction Tread Safety Grating Plank,Perforated Safety Grating,Stable Tread Safety Grating,Interlock Safety Grating Plank
Maximum lengths:
Standard widths:
For the full range of materials and finishes: 120 mm / 180 mm / 240 mm / 300 mm / 360 mm / 420 mm / 480 mm.
Standard height:
For the full range of materials and finishes: 40 mm / 50 mm / 75 mm.
Application of Perforated Diamond Metal Safety Grating
Because the diamond safety grating provides high slip resistance
and has anti-rust and anti-corrosion properties, it is widely
used at sewage treatment, power, running water factory. It is also used for decoration against slipping, etc.
Correct installation way makes good use of tread plate
Bolt Seats securely anchor the grating to structural supports. The standard bolt seat features oblong holes specifically
designed to ensure a vertical anchor (with a 3/8" bolt) even if the hole is off concentrically by as much as 1/4". Available
in mill-galvanized steel, aluminum and stainless steel.
J-Clips fasten the grating securely to the supporting steel without drilling holes. Standard finish is galvanized.
Mid support clips can be used at midspan to increase load carrying capacities of individual channels by fastening several
planks together to form an integral section. The Midsupport Clip is manufactured from galvanized steel and includes two bolts.
Huihao Hardware Mesh Product Limited
15 YEARS EXPERIENCE
PROFESSIONAL MANUFACTURER OEM/ODM
ONE-STOP CUSTOM FACTORY
MEET YOUR INDIVIDUAL PROCESSING
ENSURE QUALITY AND PRECISION
China HUIHAO was established in 2013. We mainly manufacture and supply Wire mesh and insulation fastener. Our corporate headquarter is located in Changan Industrial area Shijiazhuang Hebei, factory is located in Anping Town Hengshui City. Both sites are adjacent to highway intersections, convenient and near to Tianjin ports.
We have been focused on manufacturing, research and development of wire mesh and insulation fastener more than 10 years, HUIHAO is a leading Chinese insulation fastener manufacturer knowing the European and American standards well, supply a full ranges of wire mesh, insulation pins and washers. They are widely used in HVAC, petrochemical industry, equipments insulation, shipyards, wall insulation etc. And moreover, we develop the solar panel mesh clips. In 2020 we expand our business lines of laser cutting and various customized stamping parts, providing one - stop OEM services.
Our main products are Round & Rectangular Lacing Anchor, Self Locking Washer, various of Cup Head Pin (SS Quilting Pin, Cup Head Weld Pin Insulated, Cup Head Weld Pin Without Insulation), Duct Liner Weld Pin, Perforated Base Pin, Self Adhesive Pin, Wire Mesh, various of Solar Panel Mesh Clip (stainless steel, aluminum and nylon)etc. All of our products are produced by own automatic production.
Standard packaging to ensure products arriving at destination in good condition